![]() The optimum time/temperature cycle will vary with the amount of ink deposited, fabric and the type of heat source used. They must be fused with an appropriate heat source to assure maximum durability. SQUEEGEE: 70 Durometer: Sharp or Beveled Edge 60-90-60 Triple Durometer: Sharp EdgeĭRYER TEMPERATURES: 325☏ (163☌) Fusion temperature for entire ink film. Adding 900 Catalyst does help to some degree in helping to hold the metallic particle when the item is washed, but it does not keep the ink from tarnishing. Over catalyzation will shorten pot life of ink. Do not mix more ink and catalyst than is needed for a job. Ink may be used immediately after mixing. It should be hand stirred into the ink thoroughly to the following proportions:īy Volume: 16 parts Ink to 1 part 900LF Catalyst.īy Weight: 20 parts Ink to 1 part 900LF Catalyst. 908LF Metallic Silver must be mixed with 900LF Catalyst to ensure best adhesion to nylon fabrics.ĩ00LF Catalyst is available in 2 oz. For best visual results, this ink should be printed last in a design. INK APPLICATION: 96LF Metallic Silver comes ready for use and should be printed without modification. Pre-print and test all printed fabrics for possible dye migration and wash durability before beginning production. ![]() ![]() RECOMMENDED FABRICS: 96LF is recommended for use on cotton and some cotton/polyester blends. *LF (Lead Free) Contains less than 0.025% lead. 96LF and 908LF produce the best look when directly printed onto a garment or fabric. GENERAL INFORMATION: 96LF* Metallic Silver & Metallic Gold are plastisol based products that produce a "chrome" metallic look when printed. ![]()
0 Comments
Leave a Reply. |